قائمة المنتجات
BXAZ injection ampoule machines
Content:
BXAZ injection molding machines are capable of cleaning, drying, packaging and pasting using the latest FE technology related to the pharmaceutical sector.
The injection ampoule production line is divided into three sections, each of which can work separately or connected. This line consists of the CLQ, the RSM, and the AGF.
Illustration of how it works:
Measurements:
Ampoule with a capacity of 1-20 ml, of type B conforming to GB2637 standards. |
|
A piece / s 7,000 - 10,000 |
|
0.2 - 0.3Mpa 1.0 m | 3/ H
|
0.4Mpa 50 m | 3/ H
|
Ultrasonic washing machine CLQ114, 15.7 kW |
|
|
|
|
|
Ultrasonic washing machine CLQ114: 2500 × 2500 × 1300 mm |
|
|
|
|
|
CLQ114, 2600 kg heavy duty washing machine |
|
|
|
|
Features:
1. The production line of the injection ampoules is considered an integrated set of processes and continuous and dependent units in their work on each other. Ranging from washing, sterilization, packing and locking.
2. The use of filter technology in the washing machine filter is used to get the clean water and compressed air needed to clean the flasks.3. Ampoules are moving on the belt conveyor quickly and steadfastly in a straight shape to avoid causing any damage.
4. There are two water reservoirs and double ventilation. The water tank is separated from the rudimentary water tank, and then the washing process begins with water step by step.
5. The moving water-resistant arm is installed on one side.
6. Ampoule production machines use washing or ultrasonic cleaning.
7. Ampoules are sterilized by hot air "HDC", corresponding to GMP standards.
8. This machine uses the principle of working by negative pressure in the process of tightening on the filter, which in turn filter the channel.
9. This machine uses the thermal hinge and hot horizontal air system.
10. Ampoule production machines use the conveyor belt conveyor to transport the ampoules, and in turn the component of a total of compact chains.
11. The machine uses the latest technology, such as the existence of multi-injection injection, the nitrogen filling of the back and front, and the adhesive of wire.
12. The packing and adhesive machine is characterized by the open-wall design, allowing the bottles to enter continuously, while maintaining the strength of performance all the time.
13. These machines are characterized by a uniform and similar design, and can be used to fill ampoules with a capacity of 1-20 ml.
عمليات البحث ذات الصلة: