قائمة المنتجات
Machines for the production of blood collection tubes (after labeling)
Content:
The machines used for the production of blood collection tubes use the adhesive machines which are delivered online. These machines are used
The best types of technology, which are capable of tracking both labels and seals, whether or not there are liquids, or not, inside the tube, etc.The correct tube is sent to place the label on it, and the damaged tube is immediately removed.
Positives:
1. Economical: These machines use the best types of technology, and this production line is characterized by its ability to separate damaged or damaged pipes (including damage to plugs or covers, etc.). Up to 100% accuracy.
2.
Minimize pollution by minimizing tube exposure to oceanic influences
.
(
Pipes
PET
- 100,000)
: In this stage - loading phase only, direct friction occurs between the worker and the pipe. And then be sure of the extent of cleanliness and sterilization.
3. Machines producing blood collection tubes need three workers: so that the loading phase only needs the workers initially. In front of the stage of placing posters and checking accuracy reaches up to 100%. This production line, which has a production capacity of 18,000 to 24,000 pieces / h, can provide the economic cost of 15 workers.
4. The process of checking and verifying the labels in accordance with international specifications, including the existence of bar code, prepared for export.
5. During the inspection process, the automatic checking machine checks all the tubes and ensures the mode and quality of the label for a 100% high result. The labels that do not succeed are immediately excluded.
6.
The speed of placing stickers is consistent with the speed of the production line, with the final production volume ranging from 18,000 to 24,000 pieces per hour.
Measurements:
13mm pipe (length 75 mm, or 100 mm), pipe diameter 16 mm (100 mm long) |
|
Ability to meet customer requests, in addition to providing ready-made orders |
|
18,000-24,000 pieces / hour |
|
9999% |
|
9999% |
|
380 volts / 50 Hz |
|
12 kW |
|
The rate of error is 1%%, 10ul / time, 20ul / time, 30ul / time, 40ul / time, 200ul / time, 300ul / time, 400ul / time, 500ul / time, 600ul / time |
|
, The amount of clean air consumption: 300 liters / min 0.6 - 0.8Mp |